TOYOTA

Winch Ready Option: Winch Access (Fairlead opening, side access holes, and light bar cut out)

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Available now for your 2014+ 4Runner SR5, Trail, or TRD Pro!

***Does not work on Limited or TRD Sport trim levels or 2010-2013 unless front end plastic and headlight is updated to newer 14+ year.

Built Hefty tough to be abused, the new Hefty Fabworks Banshee Hybrid bumper for the 2014 and up 4Runner provides the ultimate in strength and functionality. The best part is it's completely modular. With the removal of seven bolts the front aluminum face will come directly off the vehicle leaving a steel substructure underneath. If you don't want to run a winch initially but then change your mind later on, you can easily order just the aluminum shell rather than replacing the entire bumper. Our hoop is also a separate bolt on option as well. Easy installation process allowing full access to the winch and lighting during installation process. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x 4.5" mounting pattern. 

• Steel Skeleton Sub Structure with integrated winch mount with recessed hawse fairlead mount, light bar mount and 1" thick weld through recovery points.
• Aluminum outer shell for corrosion resistance and weight reduction
• Product Weight: 35lbs over stock (Total weight about 55 lbs)
• Ability to mount most popular 20" single row LED light bars.
• No hoop, low hoop or tall hoop options available. Tall hoop clears TSS sensor and sits just below the TOYOTA cross bar.
• Complete bolt on installation (cutting of the stock bumper required).
• No Powder Coating option available: Unfinished aluminum comes DA sanded and pre-prepped for powder coating or custom finish.
• NOTE: 2020 models with the TSS sensor in the grille can not use the optional Low Hoop but will work without it.
  
• Will work with or without a 1" body lift.

Built by skilled craftsmen in Colorado Springs, CO USA

For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Certain remote/limited access shipping zones may accrue additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (drilling/cutting of factory bumper)

Installation instructions: 2014+ 4Runner Banshee Bumper Installation Instructions

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

US Patent Pending

High Clearance Front Bumper

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Designed here in house all out of top grade 3/8'' and 3/16'' steel with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

• This product ships bare metal and will need to be coated before install
• Powder coating options are available for local installation - please call us for more details 

Weight - 130lbs 

**TSS option available**

Shown in photo but not included -

Winch - Zeon 10K Found HERE 

Baja Designs listing

- LP9 found HERE 

- Squadron SAE found HERE

-Squadron sports found HERE

- Baja Designs 30'' upper light bar found HERE 

- Baja Designs S2 

Winch, lighting and accessories not included in price 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***TRD Pro factory skid plate may require modification to work with this bumper. Compatible with most aftermarket skid plates.

Built Hefty tough to be abused, the new Hefty Fabworks Banshee Hybrid bumper for the 2016 and up Tacoma provides the ultimate in strength and functionality. The best part is it's completely modular. With the removal of seven bolts the front aluminum face will come directly off the vehicle leaving a steel substructure underneath. Easy installation process allowing full access to the winch and lighting during installation process. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x 4.5" mounting pattern. Control box relocation bracket included 

• Steel Skeleton Sub Structure with integrated winch mount with recessed hawse fairlead mount, light bar mount and 1" thick weld through recovery points.

• Aluminum outer shell for corrosion resistance and weight reduction

• Product Weight: 35lbs over stock (Total weight about 55 lbs)

• "No hoop" or "low hoop" options available. Low Hoop is welded on.

• Complete bolt on installation (cutting of the stock bumper required).

• See how our modular design works:

Note: The Tacoma hoop is weld on.

Built by skilled craftsmen in Colorado Springs, CO USA

For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Certain remote/limited access shipping zones may accrue additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (drilling/cutting of factory bumper)

Installation instructions: 2014+ 4Runner Banshee Bumper Installation Instructions

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

US Patent Pending

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

2005 - 2015 Toyota Tacoma Tube Winch Bumper
Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA virgin steel, the 3/16" thick mounting plate, 3/8" thick uprights, and sleeved integrated recovery points make this a very strong and lighter weight bumper vs most steel bumpers on the market for your Tacoma. Yes you can run this bumper without suspension modifications but we recommend 650lb springs for your front suspension when running a winch. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Available for all models and years for the 2nd Gen Tacoma. Please select vehicle model in options list.

Bumpers come raw steel ready to be coated by you.

Winch capable up to 10,000 lb with non integrated solenoid. May require relocation of control box to fit winch.
This bumper requires trimming the factory bumper cover.
Mounting tabs for 3 lights on top bar and additional mounting locations for aftermarket fog lights in the bumper wings (7 tabs total). Most 3 1/2" fog lights or Pods will fit. Fits up to a 30” light bar (may require a U cradle or other mounting bracket to work), two Baja Designs LP9's, or three Baja Design LP6's or similar.

Bolt on application

Items Included:
(1) Bare Front Tube Bumper
(1) Aluminum Filler Panel
(1) Frame Mount Set
(2) 12mm x 35mm Bolts
(14) 1.5" Fender Washers
(6) 0.5" Grade 8 Bolts
(6) Lock Washers
(6) 0.5" Nuts
(8) 3/8" Fender Washers
(8) 10mm x 45mm Bolts

Weight: 98 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (minor cutting of factory bumper cover)
Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.
Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your FJ Cruiser. Similar in strength as our Steel Series bumpers at about 1/3rd the weight (45 lbs), it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the FJ Cruiser. 

• Made in 5052 H34 1/4" Aluminum from USA.

• Optional Low hoop design allows for 20" Single Row LED Light.

• Recessed light holes for fog light mounting.

• Complete bolt on installation. Slight trimming of inner finder liner required.

• Available in raw, unfinished aluminum or Powder Coated in Semi Gloss Black textured finish.

• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships truck freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details.

HeftyFab Installation Rating: 2 (trimming/bolt on)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your 4Runner. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum Bumpers. Available for all models and years for the 4th Gen 4Runner.

Product Specifications

• Made in 5052 H34 1/4" Aluminum from USA.
• Recessed light holes for aftermarket fog lights (non-flush mount).
• Design allows for 20" LED light.
• Complete bolt on installation w/ cutting required.
• Available in raw, unfinished aluminum - 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA.

HeftyFab Installation Rating: 4 (drilling/cutting of bumper required)

Shipping and Pick Up

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

Fitment Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your 4Runner. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 5th Gen 4Runner. See options above.

***2020 models require TSS relocation. Please select model year to include this kit. Kit includes mounting bracket, trim kit, and new OEM wiring harness. If you have a front camera, please also select the front camera relocation option.

NOTE: During Installation, DO NOT start vehicle with TSS Sensor unplugged! Starting the vehicle with the sensor unplugged will result in recalibration being required by Dealership

*** Limited models with front parking sensors. Parking sensors will not work with this bumper and will have to be deactivated on vehicle control center on the dash.

• Made from a combination of 5052 H34 1/4" Aluminum and 3/8, 3/4" 6061-T6 Aluminum. Frame mounts are 1/4" Steel
• Raw Product Weight: 59lbs
• Recessed lighting holes for aftermarket lights.
• No hoop, low hoop, or PreRunner hoop options available.
• Low hoop design allows for 30" Single Row LED Light.
• Complete bolt on installation (cutting of the stock bumper required).
• Available in raw, unfinished aluminum 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

INCLUDES:

• Aluminum Bumper
• Frame Mounts
• Cooler Line Guards
• Lower Panel
• All hardware/bolts necessary for installation
• Click Here for Installation Instructions
• Click Here for Installation Video

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

HIGH CLEARANCE HYBRID TUBE FRONT BUMPER

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

The all new Hefty Fabworks high clearance hybrid tube style bumper for your 2010+ 4Runner.
Designed here in house all out of top grade DOM steel tubing with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tacoma. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. This Premium bumper uses intricate recessed edges and cutouts for that completely unique design but also keeps the factory aesthetics. The recessed winch mount accepts most winches up to 10,00lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line is strongly suggested on all Aluminum bumpers. Available for all models for the 2016+ Tacoma

• Made in 5052 H34 1/4" Aluminum from USA.
• Raw Product Weight: 59lbs
• Recessed lighting holes for aftermarket lights (Surface Mount). Give us a call for different lighting options if the color or beam pattern you'd like is not listed.
• Complete bolt on installation (cutting of the stock bumper required).
• Option for bare aluminum (DA Sanded) and prepped for powder coat
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 
• ***Different hoop styles may interfere with Toyota Safety Sense (TSS). Please call to confirm compatibility.***

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase.

2005-2015 Toyota Tacoma Aluminum Winch Bumper

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tacoma. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes, you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9,500lbs with standard 10" x 4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 2nd Gen Tacoma. See options above.

• Made in 5052 H34 1/4" Aluminum from USA.

• Recessed lighting holes for 3.5-4" aftermarket lights

• Low hoop design allows for 30" Single Row LED Light.

• Complete bolt on installation w/ minimal cutting required.

• All raw, unfinished aluminum is DA sanded and comes pre-prepped for powder coat.

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

HIGH CLEARANCE HYBRID FRONT BUMPER

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

The all new Hefty Fabworks high clearance hybrid bumper for your 2016 - 2023 Tacoma.
Designed here in house all out of top grade DOM steel tubing with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016-2022 Tacoma

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***New design will accommodate Baja Design XL Squadron's or Regular size Squadron's.

For the 2014-2021 Toyota Tundra. Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tundra. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 12,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 14+ Tundra. See options above.

***Note: The Low Hoop will not work on 2018+ Tundras with TRD PRO grilles as it interferes with the TSS Sensor.

• Made in 5052 H34 1/4" Aluminum from USA.
• Raw Product Weight: 65lbs
• Recessed lighting holes for aftermarket lights.
• Low hoop design allows for 30" Single Row LED Light.
• Complete bolt on installation .
• Available in bare aluminum 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating
  • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 
  .

***We no longer add the plate between the hoop and top of the bumper for the light bar.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (bolt on)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. 

Fitment Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***New design will accommodate Baja Design XL Squadron's or Regular size Squadron's.

For the 2007 to 2013 Toyota Tundra. Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tundra. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 12,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 2007+ Tundra. See options above.

• Made in 5052 H34 1/4" Aluminum from USA.

• Raw Product Weight: 65lbs

• Recessed lighting holes for aftermarket lights.

• Low hoop design allows for 30" Single Row LED Light.

• Complete bolt on installation.

• Available in bare aluminum

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (bolt on)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Built Hefty tough to be abused! This bumper can handle the harshest off road abuse. Unlike other aftermarket bumpers that use thin 1/8" or thinner metal, this Hefty Fabworks bumper is built with strength in mind. Using the only highest grade A36 American Steel, the 3/16" main body, 3/8" mounting plates, sleeved and integrated recovery points make this the strongest bumper available for your 4Runner. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Available for all models and years for the 4th Gen 4Runner.

• Made of A36 3/16" and 3/8" USA Steel.
• Recessed lighting holes for aftermarket lights (non-flush mount)
• Low hoop design allows for 30" Single Row LED Light.
• Available in Low Hoop or Full Guard (3 Hoop).
• Complete bolt on installation w/ cutting required.
• Available in raw, unfinished steel - DA sanded and prepped for powder coating
  
  • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call for options 
  
  
  
  

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change. 

Fitment Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009

The New High Clearance Front Bumper

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

The all new Hefty Fabworks high clearance Steel Bumper for your 2016 - 2023 Tacomas.

Designed here in house all out of top grade 3/8'' and 3/16'' steel with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

• This product ships bare metal and will need to be coated before install
• Powder coating options are available for local installation - please call us for more details 

Weight - 130lbs 

Product winch and lighting recommendations

Winch - Zeon 10K Found HERE 

Baja Designs listing

- LP9 found HERE 

- Squadron SAE found HERE

-Squadron sports found HERE

- Baja Designs 30'' upper light bar found HERE 

- Baja Designs S2 

Winch, lighting and accessories not included in price 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016-2022 Tacoma

2005-2015 Toyota Tacoma Steel Winch Bumper

• Made of A36 3/16" and 3/8" USA Steel.
• Recessed lighting holes for 3.5-4" aftermarket lights
• Low hoop design allows for 30" Single Row LED Light.
• Available in Low Hoop or Full Guard (3 Hoop).
• Complete bolt on installation w/ minimal cutting required.
• Includes Radiator Skid w/ Purchase
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA.

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015